Zebra Z4Mplus User Manual

Z4Mplus and Z6Mplus User Guide iii
Your feedback helps us improve our documents to better serve you!
Please take a few minutes to evaluate your experience using this document.
Product and Personal Information
1. What printer are you using? ____________________________
2. What document are you using? ___________________________
3. Have you ever worked with our product before? Yes No
If Yes, how many ___years? ___months?
4. What is your education level?______________
Document Usability
Check the rating that applies to your experience using this document:
Additional Comments
Write any additional comments on the lines provided on the next page.
Content Excellent Good Poor
The information I needed was available.
The information I needed was easy to find.
The information and directions were clear.
The illustrations were helpful.
The document was arranged logically.
The Table of Contents and Index were helpful.
The Glossary was helpful.
The level of information was appropriate for my
technical expertise.
Your Feedback Is Important

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing