Zebra Z4Mplus User Manual

Troubleshooting
LCD Error Conditions and Warnings
Z4Mplus and Z6Mplus User Guide 101
Warnings
Warning — HEAD OVER TEMP
Warning — HEAD UNDER TEMP
Caution • The printhead is hot and can cause severe burns. Allow the printhead to
cool.
Problem Solution
The printhead is over
temperature.
Allow the printer to cool. Printing
automatically resumes when the printhead
elements cool to an acceptable operating
temperature.
Caution • The printhead is hot and can cause severe burns. Allow the printhead to
cool.
Problem Solution
The printhead is under
temperature.
Continue printing while the printhead
reaches the correct operating temperature.
The environment may be too cold for
proper printing. Relocate the printer to a
warmer area.

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing