Zebra Z4Mplus Quick Reference Guide

Z4Mplus/Z6Mplus/R4Mplus
Quick Reference Guide
Use this guide to operate your printer on a daily basis. For more detailed information, refer to
the User Guide.
External View
Figure 1 • Exterior of Printer
Front
1
2
Rear
3
4
1
Control panel
2
Media door
3
Power switch (O = Off, I = On)
4
AC power connector
© 2007 ZIH Corp. All product names and numbers are Zebra
14022L-002 Rev. A
trademarks, and Zebra and the Zebra logo are registered
trademarks of ZIH Corp. All rights reserved.
7/6/07

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing