Zebra Z4Mplus User Manual

Z4Mplus and Z6Mplus User Guide v
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and
its subsidiaries (“Zebra Technologies”). It is intended solely for the information and
use of parties operating and maintaining the equipment described herein. Such
propriety information may not be used, reproduced, or disclosed to any other parties
for any other purpose without the expressed written permission of Zebra Technologies
Corporation.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies Corporation.
All specifications and designs are subject to change without notice.

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing