Zebra Z4Mplus User Manual

144 Z4Mplus and Z6Mplus User Guide
Extend Printhead Life
Extend the Life of Your Printhead with Save-a-Printhead Cleaning Film
How to Order Cleaning Film Kits
There are five kits to accommodate printers with different print widths. Each kit
contains three 10 in. (254 mm) long strips of film. Reference the following table to
order the appropriate kit for your printer:
Order kit number: For Printers with Print
Widths of:
46902 3.0–4.0 in. (76–102 mm)
44902 4.0–5.0 in. (102–127 mm)
48902 5.0–6.0 in. (127–152 mm)
38902 6.0–7.0 in. (152–178 mm)
22902 8.0–9.0 in. (178–229 mm)

Zebra Z4Mplus Specifications

General

Print Method	Thermal transfer or direct thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Length	39 inches
Max Print Speed	10 inches per second
Memory	4 MB Flash, 8 MB DRAM
Interface	Parallel, Serial
Media Sensors	Reflective and transmissive
Media Width	0.79 inches to 4.5 inches
Media Length	0.38" (9.6 mm) to 39" (991 mm)
Ribbon Width	2 inches to 4.33 inches
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F to 105°F
Storage Temperature	-40 to 140°F (-40 to 60°C)
Humidity	20 to 85% non-condensing