Zebra Z4M Maintenance Manual

77259L Rev. 4 12/16/03 Z4M/Z6M Maintenance Manual vii
Table of Contents
Rewind Motor and Spindle Assembly ........................................................................ 4-78
Remove Rewind Motor and Spindle Assembly Removal ........................................... 4-78
Rewind Motor and Spindle Installation ....................................................................... 4-80
Rewind PCB Motor Assembly .................................................................................... 4-81
Remove Rewind PCB Motor Assembly ...................................................................... 4-81
Install PCB Motor Assembly ....................................................................................... 4-84
Pinch Roller Kit Installation ........................................................................................ 4-86
Section 5 Maintenance and Assembly Drawings ..........................................................5-1
General Information ............................................................................................................5-1

Zebra Z4M Specifications

General

Print Method	Thermal Transfer or Direct Thermal
Resolution	203 dpi
Max Print Width	4.09 inches
Max Print Speed	10 inches per second
Interface	Parallel, Serial
Memory	4 MB Flash
Media Sensors	Reflective and Transmissive
Media Width	4.5 inches
Media Length	39 inches (991 mm)
Ribbon Width	1 to 4.33 inches
Media Thickness	0.0023" (0.058 mm) to 0.010" (0.25 mm)