Zebronics ZEB COUNTY - Bluetooth Instructions

Instructions for Use:
Charging the Speaker
1. Connect the USB charging cable to the DC 5V
Charging port of the speaker and insert the
other end into a USB power source/adapter.
2. Red LED glows indicating that the battery is
being charged. The Red LED will turn off once it
is fully charged.
Bluetooth Instructions:
• Make sure you are in BT discovery mode.
• In your source device settings, search for
the BT name "ZEB-COUNTY”
• Once the BT name is visible in the settings,
tap on it and click pair.
• Single press “>” button to play or pause the
playback.
• Single press the “+/-” buttons skip tracks.
Long press “+/-” buttons to increase/decrease
volume.
USB/Micro SD Instructions:
• This mode activates upon inserting the
drive into its respective ports.
• The supported file formats starts to play.
Single press “>” button to play or pause the
playback.