Do you have a question about the Zeck Audio TWISTER 12.6P and is the answer not in the manual?
Maximum SPL | 128 dB |
---|---|
LF Driver | 12" woofer |
Coverage Angle | 90° x 60° |
Connectors | 2 x Speakon NL4 |
Type | 2-way passive loudspeaker |
Impedance | 8 Ohms |
Sensitivity | 98dB |
Enclosure Material | Plywood |
Overview of the components for the TWISTER 12.6 P speaker system.
Overview of the components for the TWISTERMIX PA system package.
Overview of the components for the TWISTERAMP active 2-way PA system.
Details the TW 6 TOP satellite cabinet, its speakers, and panning capabilities.
Describes the short tube for connecting TW6TOP and TW6TOPM satellites.
Details the TW 6 TOP M satellite, its speakers, and monitor use.
Describes the adjustable tube for satellite connection, rotation, and height.
Details the TW 12 SUB subwoofer for low-frequency reproduction.
Explains the attenuator switch, input, and monitor output connectors on the subwoofer.
Details the four-pole Speakon connectors and how to connect/disconnect them.
Introduces different setup configurations with diagrams for the TWISTER system.
Provides step-by-step instructions for setting up speaker variations A and B.
Instructions for connecting the TWISTER speaker system to a power amplifier.
Instructions for connecting the TWISTERMIX system with the PROFILER mixer.
Instructions for connecting the TWISTERAMP system with the CHAMP amplifier.
Instructions for aiming satellites towards the audience for homogenous sound field.
Instructions for aiming satellites towards audience and stage for monitoring.
Explanation of the automatic tweeter protection circuitry against overload.
Guidelines for safely transporting the speaker cabinets, securing them.
Advice on protecting cabinets from rain, snow, and humidity.
Details the 10m cable for connecting TW 6 TOP M as floor monitor.
Details the 10m cable for connecting TW 6 TOP M with TW 6 TOP.
Lists technical specifications for TW 6 TOP and TW 6 TOP M satellites.
Lists technical specifications for the TW 12 SUB subwoofer.
References specifications for CHAMP 4.250 X and PROFILER 14.1000.
Defines a subwoofer as a speaker cabinet for low frequencies.
Defines a satellite as a small speaker cabinet for high/mid frequencies.
Explains passive crossover networks for dividing speaker signals.
Defines fullrange signal as containing the entire audio spectrum.
Explains active PA systems with separate amplifiers for satellites/subwoofers.
Describes Zeck Audio's tube-stand system for signal transmission.
Defines Speakon as a four-pole connector system by Neutrik.