Need help?Do you have a question about the Zeck Audio Vector T3A and is the answer not in the manual?
Details the balanced XLR input and the MIC/LINE selector switch for microphone or line-level signals.
Describes the 60W Class AB and 300W Class D digital power amplifiers used in the unit.
Explains the individual limiter circuits that protect speakers from overheating and overload.
Details the function of the Volume and Bass Enhance controls for sound adjustment.
General| Power Handling (RMS) | 300 W |
|---|---|
| Power Handling (Program) | 600 W |
| Impedance | 8 Ohms |
| Sensitivity (1W/1m) | 98 dB |
| LF Driver | 12" woofer |
| HF Driver | 1" compression driver with 1.75" voice coil |
To Next Page
