REMOTE CONTROL MANUAL
(8 BUTTONS)
DEFINITION OF AN APPROPRIATE BASE
* APPLICABLE TO ADJUSTABLE BED
WITH NO LEGS :
Any metal stand used to support your adjustable bed
should be able to provide strong support to the mattress
and the adjustable bed. This must include a central support
and at least 5 support legs.
REFERENCE GUIDE
A. Raise the head section of the adjustable bed.
B. Lower the head section of the adjustable bed.
C. Raise the foot section of the adjustable bed.
D. Lower the foot section of the adjustable bed.
E. Raise the head and foot sections of the
adjustable bed.
F. Lower the head and foot sections of the
adjustable bed.
G. Return all sections to at position.
H. Press and hold to activate the ashlight.
ADDITIONAL FUNCTIONS
» To increase the visibility of the wireless
remote control in low-light conditions, the
buttons have a backlight feature; they light
up when pressed.
» It is possible to synchronize two adjustable
beds to the same remote control. To do this,
refer to the programming instructions on our
website : www.zedbed.com
C D
A
B
H
G
E
F
19
To Next Page
Loading...
