Zeegma Draden - After Use

EN
2. Switch the device on, the indicator (7) will go on and the machine will start
heang up. Aer about three minutes, the device will be hot enough. When
it happens, the indicator (7) will go o. Press the buon on the body to
release steam.
You can easily assemble and disassemble the product accessories. The equipment
may by used to clean doors, windows, oors and clothes.
Aer use
Aer you have used the product, unplug it and pour water remains out.
How to clean and maintain
To prolong the life of the device, please follow the cleaning and maintenance
guidelines.
•
Use this device in accordance with intended use and guidelines in the manual.
Roll up the feeder cable aer every use.
•
When the device cools down completely, unscrew the safety valve and pour
water remains out. Clean the tank and let it dry o.
• Insert all set components back into the packaging. Store them in a dry and
well-venlated area.
To ll the tank in, use a regular tap water. If the water in the place of your
residence is hard, using tap water may lead to early scaling of the steam cleaner
and in eect shorten its life. This being the case, ll the product with dislled
water.
Aer every use, empty the water tank not to let scale accumulate.
Do not add any liquids to the tank and do not use clothes drier water, aromac
water or soened water, fridge water, AC water and rainwater. They contain
organic waste and mineral elements which, when heated, may react chemically
and damage the spray, cause brown dirt and lead to early wear of the equipment.
The use of prohibited types of water will invalidate the manufacturer’s guarantee.
Do not use an abrasive sponge to clean the device. The device must be cleaned
properly aer every tenth use.