EN
FIRST USE
Remove all cardboard elements and lms from the device.
Acvate the device for 10 minutes and set 200
°
C to remove default preservaves and
odor. The device may generate a bit of smoke, it is natural.
HOW TO USE
1. Hold a handle (12) and pull the reservoir (9) with a basket (13) from the body
(10) and place on a stable surface. NOTE: when doing so, do NOT press bin
disconnect buon (11).
2. Place products in the basket (13) and put it in the body (10). When lling the
basket, do not exceed MAX level in the scale inside.
3. Place the reservoir with the basket in the device.
4. Provide power supply to the deep fryer. Press “On/O” to switch the device
on.
5. Every me you press (4), you increase temperature. When you press (5), you
decrease temperature.
6. Once selected temperature reached, heang indicator (14) stop lighng.
7. To set cooking me, use mer control buons (+ to extend and – to shorten
me). Press the buon once to add or reduce 1 minute.
8. When mer counts down to 0, the cooking process will be nished. You can
also nish cooking earlier – to do so, click OFF buon.
9. When the reservoir with the basket is ejected during operaon, it stops
working. To resume cooking, insert the reservoir with the basket to the deep
fryer and press ON.
WARNING: The reservoir with basket are very hot. Place it on heat-resistant
surfaces.
TIP: It is advisable to mix elements in the basket every 7-10 minutes.
CLEANING AND MAINTENANCE
1. Before you start cleaning, make sure the device has been disconnected from
the source of power and cooled down.
2. To clean the device, use a wet cloth. Do not use solvents and other sharp materials.
3. The reservoir (9) and basket (13) must be washed in warm water with a
dishwashing liquid shortly aer the use.
4. The basket (13) can be removed from the reservoir (9) by pressing (11).
5. The basket (13) and reservoir (9) are dishwasher safe.
The pictures are for reference only. The real design of products may dier from pictures
presented.
To Next Page
Loading...
Need help?
General
