Zefon International Bio-Pump Plus User Manual

Maintenance
Proper care and maintenance of your Bio-Pump
®
Plus is essential for a long useful life. It is a delicate
electronic device and should be treated accordingly. Rough and abusive use and/or accidental
impacts may damage the unit. Zefon offers the following guidelines in caring for your equipment.
1. Keep the unit clean and free of dust and dirt. It may be wiped down with a clean dry cloth.
2. Keep the battery charged. Charge periodically when not used for a prolonged amount of time or
leave plugged in for a continuous trickle charge.
3. Always store Bio-Pump
®
Plus in its case for proper protection.
4. Do not ship the Bio-Pump
®
Plus using the carrying case as the shipping container. The case is not
designed to be a shipping container and damage may occur.
5. Do not attempt to oil the motor. The motor is designed to be maintenance free.
6. Do not store the unit in extreme heat for any extended period of time.
5350 SW 1st Lane, Ocala, FL 34474 USA
Tel: +1 (352) 854-8080; Fax: +1 (352) 854-7480; www.zefon.com
LA03066 Rev 2
Optional Accessories
Heavy Duty Tripod Sampling Stand ZA0043
Primary Calibrator Kit with TSI 4046 Calibrator ZBP-200-CAL
Remote 5’ Extension Tubing ZBP-310
Parts & Accessories
Bioisolation Filter ZA0047
Flow Indicator (Air-O-Cell
®
) ZBP-302
Flow Indicator (Via-Cell
®
/ Air-O-Cell
®
CSI) ZBP-305
AC Power Adaptor, 100v-240v ZBP-304
Battery ZBP-315
Air-O-Cell
®
Cassettes (10/pk) AOC010
Air-O-Cell
®
Cassettes (50/pk) AOC050
Via-Cell
®
Cassettes (10/pk) VIA010
Air-O-Cell
®
CSI Cassettes (2/pk) CSI002
Air-O-Cell
®
CSI Cassettes (10/pk) CSI010
ZBP-310 Remote Extension
shown attached to Bio-Pump
®
ZA0043 Heavy Duty
Tripod Sampling Stand
ZBP-200-CAL shown.
Bio-Pump
®
sold separately.
Description
The Bio-Pump
®
Plus is an advanced portable, battery powered air sampling pump designed for the
exclusive use with Air-O-Cell
®
,Via-Cell
®
, and Air-O-Cell
®
CSI cassettes.
Specifi cations
Flow Rate: 15LPM
Accuracy: ± 5 %
Housing: PC/ABS plastic
Battery: Rechargeable Nickel Metal Hydride (NiMH)
Run Time: 100 fi ve minute samples on new, fully charged battery
Dimensions: 4.5” (w) x 2.75” (h) x 8” (d) inches
Weight: 1.75 lbs
5350 SW 1st Lane, Ocala, FL 34474 USA
Tel: +1 (352) 854-8080; Fax: +1 (352) 854-7480; www.zefon.com
LA03066 Rev 2
Bio-Pump
®
Plus
Product # ZBP-205
Operating Instructions

Zefon International Bio-Pump Plus Specifications

General

Model	Bio-Pump Plus
Battery Life	8 hours
Power Source	AC Adapter/Charger and Internal Rechargeable Battery
Material	ABS plastic
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity Range	0-95% non-condensing

Summary

Maintenance Guidelines

Operating Instructions Overview

Bio-Pump Plus Product Description

Advanced portable, battery-powered air sampling pump designed for specific cassettes.

Bio-Pump Plus Specifications

Technical details including flow rate, accuracy, housing, battery, dimensions, and weight.

Pump Identification and Safety

Front View of Bio-Pump Plus

Identifies key components and controls on the front panel of the Bio-Pump Plus unit.

General Cautions and Warnings

Essential safety precautions for operating the Bio-Pump Plus to prevent injury or damage.

Bio-Pump Plus Limited Warranty

Details the 1-year warranty coverage for defects in workmanship and material.

Product Disclaimer

States Zefon's liability limitations regarding product sale, use, and property damage.

Battery Management and Installation

Bio-Pump Plus Battery Installation

Step-by-step guide for safely removing the old battery and installing a new one.

Checking Bio-Pump Plus Battery Level

Instructions on how to check the current battery percentage via the unit's display.

Low Battery Indicator and Shut Down

Explains low battery warnings, unit shutdown, and operation via AC power.

Calibration Procedures

Adjusting Bio-Pump Plus Calibration

Guide to adjusting the pump's flow rate using a flow indicator or calibrator.

Verifying Bio-Pump Plus Calibration

Steps to check the pump's current calibration without altering the settings.

Sampling Modes and Operation

Quick Sample Mode Operation

Allows easy sampling for common times like 1, 2, 5, or 10 minutes.

Single Sampling Mode Operation

For taking one sample at a predetermined time, adjustable from 1 minute to 9 hours 59 minutes.

Sequential Sampling Mode Operation

Enables programming the pump to turn on/off at set intervals for automated sampling.