8
The generated power depends on several factors including the bike speed, the pedaling
speed and the road slope, depending on the selected power mode.
The default power mode of BIKE+ all in one is the “turbo” mode. For instructions on how
to change the power mode please refer to 5.1 and 5.4.
2.2 Regenerative braking (KERS)
BIKE+ all in one features a regenerative braking function; this allows you to slow down
the bicycle using the electric motor as a generator recharging the batteries thanks to
the integrated Kinetic Energy Recuperation System (KERS). In order to activate the regen-
erative braking you need to pedal backwards. As soon as you stop pedaling, the motor
will stop braking.
!
CAUTION: Regenerative braking DOES NOT substitute safety mechanical brakes. Please
do NOT remove the mechanical brakes from your bike.
!
CAUTION: Regenerative braking WILL NOT BE AVAILABLE when your BIKE+ all in one is
fully charged.
assist
regen
Figure 5: motor assistance and regenerative braking
To Next Page
Loading...
