Do you have a question about the Zeiss VICTORY RF Series and is the answer not in the manual?
Rangefinder | Yes |
---|---|
Laser Wavelength | 905 nm |
Magnification | 8x or 10x |
Objective Lens Diameter | 42mm / 54mm |
Exit Pupil Diameter | 5.3 mm (8x42), 4.2 mm (10x42), 6.8 mm (8x54), 5.4 mm (10x54) |
Twilight Factor | 18.3 (8x42), 20.5 (10x42), 23.2 (10x54) |
Battery | 1 x 3V CR2 |
Eye Relief | 16 mm |
Diopter Adjustment Range | +/- 4 dpt |
Close Focus | 2.5 m |
Fogproof | Yes |
Details critical safety precautions for operation, including warnings about looking at the sun or laser light.
Explains how to properly dispose of batteries and cautions against improper handling or disposal methods.
Guides users on how to insert and replace the CR2 lithium battery for the rangefinder.
Instructions on how to attach the carrying strap and fit the protective lens and eyepiece caps.
Details how to adjust the eyecups for optimal observation with or without eyeglasses.
Steps for cleaning the eyecups and refitting them onto the binocular housing.
Steps to achieve sharp focus of the aiming mark and adjust diopter compensation for clear vision.
Explains how to navigate and configure settings using the rangefinder's built-in menu.
Details how to adjust the 11 brightness settings for the red LED display.
How to set measurement units to meters or yards for rangefinding data.
Explains how to select between best target (tA b) or furthest target (tA L) measurement modes.
How to reconfigure the RANGE and SET buttons for preferred operation.
Adjusting the 11 intensity levels of the red LED display via a sliding bar.
Selecting measurement units (yards or meters) for display on the device.
Choosing between 'Best Target' or 'Last Target' measurement modes.
Choosing factory settings or reverse settings for the RANGE and SET buttons.
Instructions for cleaning the external parts of the VRF, including using water and a cloth.
Guidance on properly cleaning the optical lenses using ZEISS recommended solutions.