Zeitler EZ100 - User Manual

Observe regulations, supervise minors, keep bystanders clear, user is responsible for safety.

Use correct power supply, manage cables safely, be aware of the integrated thermal safety switch.

Operate only for intended use, wear appropriate PPE, and dispose of materials properly.

Details on shuttles, disks, axles, and assembly material for shuttles.

Accessories like adapters for various conduit sizes and parachutes for soiled conduits.

Ensure clean condition, avoid flammable materials, check for faults, disconnect mains if necessary.

Blow through conduit, use protective eyewear, keep air intake clear, handle cables carefully.

Guidance on using disks with rubber rings and single disks for different conduit conditions.

Instructions for using parachutes for soiled conduits and cones for difficult access.

Detailed steps for blowing pull lines, including conduit preparation and shuttle insertion.

Procedure for fixing two pull line rolls together by knotting.

Steps for suction mode, including conduit preparation and suction unit attachment.

Recommends authorized dealers and genuine parts for servicing and repairs.

Lists conditions that void the warranty, such as unauthorized modifications or improper use.