ZEKLER 412 RDB - Accessories and Spare Parts; Change of Hygiene Kit

13
A:7. Noise suppressed boom microphone
A:8. Replaceable foam lled head cushion
A:9. Helmet/Cap attachment of thermo plastic, 30 mm standard
A:10. On/O󰀨-Volume knob for AM/FM radio
A:11. Knob for radio station selection
A:11b. AM/FM switch
A:12. On/O󰀨-Volume knob for Level Dependent function
A:13. 3,5 mm input for connection to external sound sources
A:14. Bluetooth® multi-function knob
A:15. Bluetooth® LED light
A:16. Battery lid (easy to open without using tools)
A:17. Socket for boom microphone
A:18. Charging socket
Accessories and spare parts
B:1. Hygiene kit HK3B: 380684118
B:2. Sweat absorbers CR1: 380684035
B:3. Windshield boom microphone: 380684084
B:4. Battery charger: 380684100
B:5. Rechargeable AA batteries: 380684068
B:6. 3,5 mm stereo connection cable: 380684043
B:7. Boom microphone: 380684076
B:8. Windshield level dependent microphones: 380684092
Change of hygiene kit (pic. E)
1. Remove the old sound absorber foam and insert the new
2. Pull o󰀨 the old ear cushion
3. Centre the new ear cushion over the hole
4. Press with a nger along the outside of the ear cushion until it attaches all around the edges
5. (only for headband models) Pull o󰀨 the old head cushion and insert the new
Important!
Earmus, and in particular cushions, may deteriorate with use and should be examined at
frequent intervals for cracking and leakage.
Hygiene kit should be changed at least twice per year. Make sure you choose the correct hygiene kit for your
hearing protector. (B:1)
Approval and technical data (see table F)
F:1) Headband
F:2) Helmet mount
F:3) Tested and certied to (standards)
F:4) Weight
F:5) Mean attenuation
F:6) Standard deviation
F:7) Assumed Protection Value
F:8) Tested and certied by (notied body)
F:9) Electrical input level (3,5 mm AUX)
F:10) Size
Approved helmet combinations
These earmu󰀨s should be tted to, and used only with the industrial safety helmets listed in table G.
G:1) Manufacturer
G:2) Model
G:3) Adapter
G:4) Warning! These helmet mounted hearing protectors are suitable for persons with medium to large head
size circumference (56-64 cm) and with medium to large
height from the top of the head to the centre of the ear canal. A smaller height may lead to improper t and
reduce the hearing protector´s noise attenuation properties.
Earmu󰀨s complying with EN 352-3 are of medium size range or small size range or large size range. Medium
size range earmu󰀨s will t the majority of wearers. Small size range or large size range earmu󰀨s are designed
to t wearers for whom medium size range earmu󰀨s are not suitable.