Control panel (Fig. B)
18
DECHLORINATE/RE-BOIL: the DECHLORINATE/
RE-BOIL button is used for switching on the re-boiling
mode, the dechlorination mode and the cleaning mode
with the use of citric acid.
19
RE-BOIL LED indicator
20
DISPENSE button: water pouring button. In the unlocked
mode, water can be poured after pressing this button.
21
/ : lock button: this button is used to unlock the
appliance in order to pour the water.
22
Lock LED indicator
23
: this button is used for changing the temperature
of the water (98°C, 85°C, 65°C) to be kept warm or
cooled ( )
24
Temperature LED indicators
Preparing the appliance for operation
Before rst use or if you are not using the
appliance for a longer period of time, clean the
inside of the appliance and boil water twice and
pour it out through the outlet (7).
Removing and retting the lid (Fig. C)
1
Using the button (1) open the lid (3) by pulling away the
movable part of the handle.
2
Hold the lid (3) at a 45° angle and press down the lid
release button (6) to remove the lid.
3
Ret the lid (3) placing it in the slot of the release
mechanism.
Pouring water into the appliance
and plugging in the appliance (Fig. D)
1
Open the lid (3) and pour water into the appliance.
Pour water into the appliance using a separate
vessel so that the casing will stay dry.
Do not ll beyond the maximum ll indicator
(15).
If the water level is below the MIN level on
the water indicator (9), pour water into the
appliance. Otherwise, the appliance will become
hot, which may cause its discolouration or
deformation.
2
Close the lid (3) until you hear a click sound.
3
Place the appliance on a hard surface near an electricity
supply outlet.
4
Connect the power cord (17) to the plug-in socket (13)
on the appliance casing (12).
Never cover the appliance with any objects while in
●
operation.
Do not remove the plug from the outlet by pulling by
●
the cord.
Never use any aggressive cream or paste cleaners for
●
cleaning the casing, as they can remove the imprinted
information, symbols and warnings.
Tip
Product information and tips on its use
This appliance is intended for household use only.
●
Before use, always make sure that the appliance is
●
clean and dry.
Read this manual carefully before you use the appliance.
●
Technical data
The technical parameters are given on the data plate of the
appliance.
4.0 litre capacity.
ZELMER electric pots are built in I class insulation and they
are equipped with supplying cord with grounding wire and
grounding plug.
The ZELMER electric pot meets the requirements of the
standards in force.
The appliance is compliant with the requirements of the
following directives:
Low Voltage Directive (LVD) – 2006/95/EC; –
Electromagnetic Compatibility (EMC) – 2004/108/EC. –
The product is afxed with the CE mark on the data plate.
Appliance elements (Fig. A)
1
Lid opening button
2
Steam outlet
3
Lid
4
Inner lid
5
Sealing ring
6
Lid release mechanism
7
Spout
8
Control panel
9
Water level indicator
10
Filter
11
Dispensing spout
12
Casing
13
Plug-in socket
14
Handle
15
Maximum ll indicator
16
Rotable base
17
Power cord
To Next Page
Loading...