Replace and remove jug from the motor
unit
1
Place the assembled jug (10) on the motor unit (1) in
the open , position in accordance with the arrow on the
motor unit and symbol on the jug base (7)
.
2
Lock the jug turning it clockwise until the arrow on the
motor unit (1) is aligned with the pictogram on the jug base
(7) .
Makesurethejugiscorrectlyinstalledonthe
motorunit.
● Before removing the jug, turn off the appliance by
pressing the
button and unplug the appliance
from the wall outlet.
3
Holding the jug handle (10) rotate it anticlockwise into
unlocked position .
4
Remove the jug (10) from the motor unit (1).
Hot plate (6) and the blade unit (8) heat up
whenusingthecooking/heatingfunction.Do
not touch the hot plate(6)and blade unit (8)
whenhot—riskofburns.
Blend
The appliance is designed for blending and chopping various
food products. You can also use it to crush ice and frozen
products.
1
Places the motor unit (1) with a mounted jug (10) on
a dry, rm, level surface near a wall outlet and out of reach
of children.
2
Plug the power cord into an electrical outlet. You will hear
a single beep.
3
Put the ingredients in the blender jug (10). Cover the jug
(10) with the lid (12).
Youcanaddmoreingredientsduringblending.
Todothisliftthelidcupwithvolumemarkings
(13).
Donotoverllthejugabovethe1750mlmark.
4
Press on/off button. Select the appropriate blend
speed with the control knob (e).
When blending, use the speeds marked with
bluelineonthecontrolknob(e).
5
When you reach the desired consistency, turn off the
appliance by turning the control knob (e) to 0 position.
After3minutesofoperationturnofftheappli-
anceforatleast5minutes,allowingthemotor
tocool.
6
Once you have nished, press the on/off button to
turn off the appliance and unplug the appliance from the wall
outlet.
Prepare soup
1
Place the motor unit (1) with a mounted jug (10) on
a dry, rm, level surface near a wall outlet and out of reach
of children.
2
Plug the power cord into a wall outlet.
3
Press on/off button.
4
Press the + or button to set the desired time.
5
If you want to fry the onion or garlic, add oil or butter to
the jug (10).
Makesurethebutterisatthebottomofthejug
ratherthantrappedontheblades(8).
6
Set temperature to , to melt the butter. Add
onion and garlic and cook until softened. When frying, you
don’t need to cover the jug with a lid (12).
7
Replace the lid (12) and blend the contents by pressing
the button.
8
Add remaining ingredients (vegetables, water, spices,
etc.), adjust the temperature to and cook until boil-
ing.
When cooking/heating do not overll the jug
abovethe1400mlmark.
9
Once boiling, reduce the temperature by pressing the
button, and re-adjust the time with the + or but-
tons and leave to cook.
The appliance is equipped with a thermostat
thatmaintainsaconstanttemperature.After20
minutesofcookingatthe setting,the
applianceautomaticallyswitches to the
setting ( indicator light will be off and
the indicatorwillbeon).
10
When cooking / heating is nished, the appliance will
beep six times and automatically switch to keep-warm mode
(KEEP WARM indicator light will be on in white).
11
Press the on/off button to turn off the keep warm
function at any time.
12
Press the on/off button again, use control knob (e)
to set speed to level 1 and blend the soup to the desired
consistency.
Whenblendinghotliquids,makesurethatthe
jug(10)iscoveredwithalid(12).
Whenblendinghotliquids,usespeedsmarked
witharedlineonthecontrolknob(e).
Never use a high speeds (above level 2) for
blendinghotliquids.
E
F
D
To Next Page
Loading...
Need help?
General
