EasyManua.ls Logo

ZEMITS ABIGON PRO - Page 10

ZEMITS ABIGON PRO
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
CAVITATION PROTOCOL
Duration of cavitation should not exceed more than 40 min per session.
Recommended frequency of cavitation sessions is 1-2 times per week.
Total cavitation exposure should not exceed 60 minutes per week for one person
Clean the treated skin area.
Apply ultrasound conductive gel on the skin.
Select the minimum working parameters on the machine (it is recommended to start an low
intensity and increase steadily throughout the treatment).
Move the handpiece in circular lines without pressure on the skin fold. You should point the
nozzle in direction of the skin-adipose tissue. Do not direct it straight toward the bones or
body cavities.
The handpiece should be in constant motion. Do not stop in one spot.
You should apply cavitation only on the local areas of fatty deposits.
It is prohibited to use cavitation over the protruding angles of bones (iliac bones, ribs, knees,
elbows, etc.)
It is prohibited to use cavitation on the joints, on the projection of the glands, pelvic, popliteal
fossae, elbows, face, neck, and armpits.
You should always control the gel layer by applying more if necessary.
It is necessary to provide lymphatic drainage after cavitation to accelerate the process of
removing the decay products.
The average treatment consists of 5-10 sessions.
Recommendations
Cavitation treatment should be performed one to two times per week
One session consisting of several treatments should be performed twice a year
On the day of treatment, patient should drink at least 1.5-2 liters of water