Do you have a question about the ZENEC ZE-NC620DMH and is the answer not in the manual?
Details about the Map screen, the most frequently used screen in ZE-NC620DMH.
Explains how to navigate and interact with the map display.
Methods for selecting a destination to set up a route.
Detailed steps for entering street addresses to find a destination.
How to find and select destinations from a list of Points of Interest.
Using the map to select a specific location as the destination.
How to choose a previously saved Favourite location as the destination.
Options for changing an active route, such as adding waypoints.
Selecting start point or destination for off-road navigation.
Access and configuration of program settings and behaviour.
Settings that determine how routes are calculated, including vehicle and road types.
Fine-tuning map appearance, view modes, and place visibility.
Details about the Map screen, the most frequently used screen in ZE-NC620DMH.
Explains how to navigate and interact with the map display.
Methods for selecting a destination to set up a route.
Detailed steps for entering street addresses to find a destination.
How to find and select destinations from a list of Points of Interest.
Using the map to select a specific location as the destination.
How to choose a previously saved Favourite location as the destination.
Options for changing an active route, such as adding waypoints.
Selecting start point or destination for off-road navigation.
Access and configuration of program settings and behaviour.
Settings that determine how routes are calculated, including vehicle and road types.
Fine-tuning map appearance, view modes, and place visibility.
| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| GPS Navigation | Yes |
| Bluetooth | Yes |
| USB Ports | 2 |
| Audio Output | 4 x 50 W |
| DAB+ | Yes |
| Apple CarPlay | Yes |
| Android Auto | Yes |
| SD Card Slot | Yes |
| Radio | FM/AM |
| Video Playback | Yes |
| Audio Playback | Yes |
| Operating System | Windows CE |