Zenit 12 - Page 19

The
meter
cannot
be
used
when
taking
flash
pictures
as
the
burst
of
light
is
too
short.
In
all
cases
the
Speed
Dial
[1]
must
be
set
to
"30-X",
the
aperture
being
determined
by
the
camera-to-subject
distance.
Tables
or
calculators
for
this
are
jiven in the instructions
for the flashgun often
being incorporated into
the gun itself. Some
flashguns have built-in
computers which allow
the aperture to be left at
one setting regardless of
camera-to-subject
distance.
19
Set the Speed Dial to
"30-X".
Remove square shield
from Accessory Shoe
[18] and put in a safe
place.