Zenit GRS 100/2/G40H A0CM(T)-E User Manual

ELETTROPOMPE SOMMERGIBILI
SUBMERSIBLE ELECTRICAL PUMPS
ELECTROPOMPES SUBMERSIBLES
ELEKTROTAUCHPUMPEN LEISTUNG
SÄHKÖKÄYTTÖISET UPPOPUMPUT
ELECTROBOMBAS SUMERGIBLES
DRÄNKBARA ELPUMPAR
ELECTROBOMBAS SUBMERSÍVEIS
ELEKTRISCHE DOMPELPOMPEN
NEDSÆNKNINGSELEKTROPUMPER
MANUALE D’USO E MANUTENZIONE
USE AND MAINTENANCE INSTRUCTIONS
MANUEL D’UTILISATION ET D’ENTRETIEN
GEBRAUCHS- UND WARTUNGSANLEITUNG
KÄYTTÖ- JA HUOLTO-OHJEET
MANUAL DE USO Y MANTENIMIENTO
BRUKS- OCH UNDERHÅLLSANVISNING
MANUAL DE USO E MANUTENÇÃO
INSTRUKTIES VOOR HET GEBRUIK EN ONDERHOUD
BRUGS-OGVEDLIGHOLDELSESVEJLEDNING
water technology
GRS - GRE - GRI
APS - APE

Zenit GRS 100/2/G40H A0CM(T)-E Specifications

General

Power Supply	Electric
Rated Voltage	400 V
Frequency	50 Hz
Protection Class	IP68
Insulation Class	F
Weight	21 kg
Max Immersion Depth	10 m
Material	Cast Iron
Pump Type	Submersible
Pump Application	Wastewater, Sewage
Discharge Connection	G2

Summary

General Safety Regulations

List of Residual Risks

Residual risks typical of all equipment connected to mains electricity supply: RISK OF ELECTRIC SHOCK.

Safety Regulations Applying to Installation and Maintenance Operations

Safety regulations for maintenance operations, covering personnel, stopping the pump, disconnection, etc.

Individual Protective Devices (IPD) to be Used

Installation

Placement

Connection to the Power Supply and Determination of the Rotation Direction

Installation of Float Switches

Maintenance

Oil Check and Change in the Mechanical Seal Chamber

Procedure for checking and changing oil in the mechanical seal chamber, including frequency and oil type.

Checking Parts Subject to Wear

Minor Problems: Causes and Solutions

Electrical Connection

Single Phase Electric Motor Connection

Three Phase Electrical Connection