Why is my laundry stiff after washing in Zenith Washer?
If your laundry becomes stiff after washing in your Zenith Washer, it could be due to using too little detergent for the water hardness. Ensure you use an appropriate amount. Also, make sure you're putting the detergent in the correct compartment and don't mix softener with detergent. Clean the dispenser with hot water.
Why is there too much foam in my Zenith Washer?
Excessive foam in your Zenith Washer can be caused by using improper detergents or too much detergent. Make sure you use detergents appropriate for washing machines and only use a sufficient amount. Storing detergent improperly can also contribute; keep it in a closed, dry location away from heat. Some meshed laundry items may also create too much foam, so use less detergent for these items. Ensure the detergent is placed in the correct compartment. In some cases, the softener may be dispensing early, which could indicate a problem with the valves or dispenser, requiring service.
Why is my laundry wet after washing in Zenith ZWM7120W?
If your laundry is still wet after the wash cycle in your Zenith Washer, it could be due to excessive foam caused by using too much detergent. The automatic foam absorption system might have been activated. Try using the recommended amount of detergent in future washes.
Why Zenith ZWM7120W Washer programme cannot be started?
If a Zenith Washer programme cannot be started, the machine may have entered self-protection mode due to a supply problem such as line voltage or water pressure. To cancel the current programme, turn the Programme Selection knob to another programme. This will cancel the previous selection.
General| Door hinge | Left |
|---|---|
| Motor type | Brushless |
| Water fill | Cold |
| Control type | Rotary |
| Loading type | Front-load |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Custom panel-ready | No |
| Door opening angle | 170 ° |
| Outlet hose length | 1.3 m |
| Appliance placement | Freestanding |
| Drum capacity | 7 kg |
| Cycle time (max) | 207 min |
| AquaStop function | - |
| Delay start (max) | 9 h |
| Residual moisture | 52 % |
| Spin-drying class | B |
| Maximum spin speed | 1200 RPM |
| Minimum spin speed | 600 RPM |
| Noise level (spin) | 74 dB |
| Noise level (wash) | - dB |
| Number of washing programs | 15 |
| Maximum water flow pressure | 1000 kPa |
| Minimum water flow pressure | 100 kPa |
| Cycle time (quick washing program) | 30 min |
| Current | 10 A |
| Connected load | 2200 W |
| Power plug type | Type G |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 45 L |
| Energy consumption washing per cycle | 0.685 kWh |
| Energy efficiency index (EU 2017/1369) | 1.04 |
| Feet adjustment | 15 mm |
| Package depth | 560 mm |
| Package width | 650 mm |
| Package height | 880 mm |
| Package weight | 64000 g |
| Hose diameter | 20 mm |
| Washing class | A |
| Required tools | Standard tool box |
| Paper packaging weight | 10 g |
| Plastic packaging weight | 178 g |
| Harmonized System (HS) code | 84501190 |
| Expanded Polystyrene (EPS) packaging weight | 760 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 840 mm |
| Weight | 63000 g |
| Door opening diameter | 300 mm |
Safety precautions for the product's surroundings and operation.
Guidelines for safe use by children and storage of hazards.
Precautions related to power supply, grounding, and electrical hazards.
Warnings about hot parts during or after operation.
Information on recycling electrical and electronic equipment.
Details on the recyclability of packaging materials.
Identification of the machine's main components and features.
List of items included in the product packaging.
Key technical data and performance details of the appliance.
Instructions for proper placement, connection, and setup of the machine.
Steps for sorting laundry and preparing it for washing.
Guidance on using the control panel and selecting wash programmes.
Procedures for regular cleaning of parts to ensure longevity.
To Next Page
