Need help?Do you have a question about the Zenner zelsius C5-CMF and is the answer not in the manual?
General| Measuring Principle | Ultrasonic |
|---|---|
| Accuracy | Class 2 |
| Power Supply | Battery or Mains |
| Communication | M-Bus |
| Approval | MID |
| Protection Class | IP65 |
| Output | Pulse, M-Bus |
| Operating Temperature | 5°C to 55°C |
Overview of the zelsius C5-CMF heat meter and its features.
Specifies flow characteristics, pressure loss, and temperature ranges for the flow sensor.
Details platinum resistance, sensor type, temperature range, and cable length for temperature sensors.
Lists technical specifications for the meter's calculator, including display and interfaces.
Provides nominal flow, diameter, and connection lengths for various meter configurations.
General advice and regulatory compliance requirements for device installation.
Specific recommendations for installing the flow sensor, including valve placement and orientation.
Information regarding the use of existing immersion sleeves with the C5 device.
To Next Page
