To Next PageTo Next Page
Need help?Do you have a question about the Zenoah LT 1338 and is the answer not in the manual?
Instructions and guidance for the operator.
Steps to take before operating the machine.
Guidelines for safe and effective operation.
Parts that need to be assembled before use.
Instructions for installing the steering wheel.
Instructions for installing the extension shaft.
Step-by-step instructions for installing the seat.
Instructions on how to adjust the seat position.
Identifies the location and function of the tractor's controls.
Explains how to adjust engine speed and choke.
Used for declutching, braking, and starting the engine.
Details on operating the gear shift lever and its positions.
How to engage and disengage the cutting unit.
How to quickly raise or lower the cutting unit.
Instructions on how to safely refuel the tractor.
How to check and maintain the engine oil level.
Instructions for checking and maintaining tire pressure.
Steps to safely start the engine.
Instructions for operating the tractor and its controls.
Instructions for starting the engine when cold.
Instructions for starting the engine when warm.
How to turn the ignition key to start the engine.
Returning the ignition key after starting the engine.
Explanation of the safety switch and its function.
Instructions for operating the tractor and its controls.
How to operate the tractor in reverse safely.
Advice for achieving the best mowing results.
Safety precautions for operating on slopes.
Guidance on mowing direction for optimal results.
How to use the machine to cut near trees and bushes.
Warning about leaving the ignition key in the machine.
Essential safety steps before performing maintenance.
Instructions on how to clean the tractor.
Steps for removing and reinstalling the engine hood.
Schedule for regular maintenance tasks.
Safety warning before performing maintenance.
Routine checks to perform before operating the tractor.
Guidelines for cleaning the tractor.
Procedure for cleaning the steering plate.
Warning regarding hot oil during oil change.
Importance of cleaning the air filter for engine performance.
Ensuring the operator presence system functions correctly.
Verifying the ROS function for reverse operation.
How to sharpen, replace, and balance mower blades.
Steps for removing mower blades.
Ensuring correct alignment when installing blades.
Warning about releasing the spring-loaded belt tension rod.
Warning about releasing the spring-loaded lift lever.
Steps for removing the mower drive belt.
Steps for installing the mower drive belt.
Adjusting mower deck height for even side-to-side cut.
Fine-tuning mower deck height for even cut.
Adjusting mower deck for proper front-to-back pitch.
Instructions and guidance for the operator.
Steps to take before operating the machine.
Guidelines for safe and effective operation.
Parts that need to be assembled before use.
Instructions for installing the steering wheel.
Instructions for installing the extension shaft.
Step-by-step instructions for installing the seat.
Instructions on how to adjust the seat position.
Identifies the location and function of the tractor's controls.
Explains how to adjust engine speed and choke.
Used for declutching, braking, and starting the engine.
Details on operating the gear shift lever and its positions.
How to engage and disengage the cutting unit.
How to quickly raise or lower the cutting unit.
Instructions on how to safely refuel the tractor.
How to check and maintain the engine oil level.
Instructions for checking and maintaining tire pressure.
Steps to safely start the engine.
Instructions for operating the tractor and its controls.
Instructions for starting the engine when cold.
Instructions for starting the engine when warm.
How to turn the ignition key to start the engine.
Returning the ignition key after starting the engine.
Explanation of the safety switch and its function.
Instructions for operating the tractor and its controls.
How to operate the tractor in reverse safely.
Advice for achieving the best mowing results.
Safety precautions for operating on slopes.
Guidance on mowing direction for optimal results.
How to use the machine to cut near trees and bushes.
Warning about leaving the ignition key in the machine.
Essential safety steps before performing maintenance.
Instructions on how to clean the tractor.
Steps for removing and reinstalling the engine hood.
Schedule for regular maintenance tasks.
Safety warning before performing maintenance.
Routine checks to perform before operating the tractor.
Guidelines for cleaning the tractor.
Procedure for cleaning the steering plate.
Warning regarding hot oil during oil change.
Importance of cleaning the air filter for engine performance.
Ensuring the operator presence system functions correctly.
Verifying the ROS function for reverse operation.
How to sharpen, replace, and balance mower blades.
Steps for removing mower blades.
Ensuring correct alignment when installing blades.
Warning about releasing the spring-loaded belt tension rod.
Warning about releasing the spring-loaded lift lever.
Steps for removing the mower drive belt.
Steps for installing the mower drive belt.
Adjusting mower deck height for even side-to-side cut.
Fine-tuning mower deck height for even cut.
Adjusting mower deck for proper front-to-back pitch.
General| Brand | Zenoah |
|---|---|
| Model | LT 1338 |
| Category | Lawn Mower |
| Language | English |
