3
4
Description & Application
The Port-A-Blaster pressure washer is designed to clean air conditioning
and refrigeration coils. It is designed with a low pressure setting for
indoor evaporator coils and a high pressure setting for outdoor condenser
coils. It is lightweight, ruggedly built, reliable, self-priming and easy to use
and carry. All accessories (trigger sprayer, wand/nozzle, and hoses) are
the pressure control.
Technical Data
Model ZPB140
Voltage: 120V
Watts: 80
Flow Rate: .25 GPM
Max Pressure: 140 psi
Weight: 11 lbs.
Dimensions
Height: 12”
Length: 11.5”
Width: 7”
Opening Under Handle: 1.5”
Handle Width: 1.5”
12”
11.5”
1.5”
1.5”
7”
Pump
Trigger Sprayer with
Wand & Adjustable Nozzle
5’ Suction Inlet Hose
Detachable
Filter Screen
16’ Sprayer Outlet Hose
with Quick Connect Fittings
Operating Instructions
1. For professional use, for cleaning air conditioning & refrigeration coils.
2. Make sure all components are in working order and that suction
“OUT” on the unit.
marked “IN” on the unit.
water or non-corrosive coil cleaning detergent solution.
To Next Page
Loading...
Need help?
General