To Next PageTo Next Page
Need help?Do you have a question about the Zepter moreJUICEpress and is the answer not in the manual?
General| Type | Cold Press Juicer |
|---|---|
| Power | 200W |
| Pulp container | Yes |
| Juice container | Yes |
| Reverse function | Yes |
| Juice yield | High |
| Warranty | 2 years |
| Pulp container capacity | 1.0 L |
| Juice container capacity | 1L |
| Material | Stainless Steel and Plastic |
Maximum ambient temperature for normal use is +60°C; the average temperature over a 24-hour period should not exceed +35°C.
This user manual is an integral part of the appliance. Read all the instructions and safety notices contained in the present manual carefully...
At the end of its lifecycle, we recommend making the machine safe by cutting the power cord. Do so only after unplugging it from the mains!
The squeezing screw, hopper and drum are dishwasher safe. 1. Separate the squeezing screw and the rubber pad from the screw.
Note! Before first use, wash the parts that come in contact with food.
Wash fruit or vegetables thoroughly, before putting them into the device. Before juicing soak/soften nuts for 12 to 24 hrs.
After taking out the fruit (produce) from the freezer let it rest for 5-10 minutes at room temperature before use.
Do not throw away the pulp after juicing! more juícepress pulp contains fibers and has nutritional values.
The device shows material or manufacturing defects. No signs of damage by the customer or presence of non-original pieces fit by other people has been found.
Normal wear and tear on parts. Damage caused by transport, inadequate use, negligence and/or incorrect use.
