Figure1 Figure2
15. Troubleshooting
Before attempting any work on the stove ensure that the main gas supply has been closed.
Possible causes for the stove not functioning correctly could be:
• The gas supply being very low i.e., there is insufficient pressure for the gas to reach the
burners.
• The regulator is leaking.
• The burners and spreaders are clogged.
• The gas is not igniting with the igniting switch: Check that the battery is installed correctly or
replace the battery.
16. Guarantee
Never allow any unqualified person to attempt a repair to the stove. Not only could this be dangerous
but it may also nullify the guarantee.
17. Guarantee Details
This product is covered by a 12 month guarantee for defective parts and workmanship. Any improper
use nullifies the guarantee.
18. Service
At least once every 12 months the following maintenance items should be carried out:
• Check all gas connections for leaks with soapy water.
• Visually inspect seals on the regulator for signs of deterioration and damage.
• Visually inspect the gas hose for signs of deterioration and damage.
To Previous Page
Loading...