Zero Z12

zero
HOME AUTOMATION
Z02 - SWING GATE
PG10
MANUAL RELEASE
To open manually the gate in case of electric power failure or in case of damage, follow the
below steps:
01. Unlock the barrier by key. 02. Move the boom to the opening posion
and lock the barrier.
NOTE : To lock operator so it can work automacally, must do it by turning the key anclockwi-
se.
Check ghtness of the screws that x the boom to the barrier’s body.
Check if the fastening metal plates didn’t suer any modicaon with the consistent ulizaon to
assure the proper funconing of the barrier.
04. MAINTENANCE
These maintenance measures must be applied every year in order to insure proper
funconing of the automated system.