Do you have a question about the zewa UAM-830 and is the answer not in the manual?
Model | UAM-830 |
---|---|
Type | Upper Arm Blood Pressure Monitor |
Accuracy (Pressure) | ±3 mmHg |
Memory | 60 readings |
Accuracy (Pulse) | ±5% |
Power Source | 4 x AA batteries |
Measurement Range (Pressure) | 0-300 mmHg |
Provides crucial safety instructions and clarifies the manual's purpose as informational, not medical advice.
Explains systolic, diastolic pressure, recording format, and provides a classification table.
Lists various factors like temperature, fear, stress, and lifestyle that can cause blood pressure fluctuations.
Highlights that high blood pressure is often asymptomatic, earning it the name 'the silent killer'.
Details the severe health risks of uncontrolled hypertension, including heart damage, artery issues, and stroke.
States the monitor is for convenient home use, noninvasive, and measures for adults over 18.
Explains the oscillometric method using a cuff and pressure sensing to determine digital readings.
Zewa's system for automatic, personalized cuff inflation for faster, more comfortable, and accurate readings.
Features a low-noise rolling motor pump for quiet inflation during measurements.
Allows storage of up to 60 measurements and calculates an average for easy comparison.
States the monitor has been clinically tested and meets accuracy standards set by the American National Standard.
Lists conditions requiring battery replacement, such as low battery symbol or no display response.
Advises on proper disposal of batteries as hazardous waste and removal during long-term storage.
Recommends sitting quietly, using a comfortable environment, and avoiding stimulants before measurement.
Advises sitting still, using the same arm, waiting between measurements, and maintaining a relaxed posture.
Instructions on plugging the tube, removing clothing, and positioning the cuff correctly on the upper arm.
Guidance on tightening the cuff to ensure a snug fit (2-finger rule) and positioning the arm for measurement.
Details the steps from pressing the START/STOP button, inflation, measurement, and display of results.
Explains how readings are automatically stored and how to recall previous measurements and averages.
Instructions on how to clear all stored measurements from the monitor's memory.
Explains error symbols like 'Err', 'Lo', and incorrect readings, with their causes and corrective actions.
Guidelines for keeping the unit clean using a soft dry cloth and avoiding abrasive cleaners or immersion in water.
Advises on proper cleaning agents, avoiding wet cuffs, and storing the unit in a clean, dry, and temperate location.
Details model, display type, measuring principle, ranges, accuracy, power source, and weight.
Specifies the recommended temperature, humidity, and barometric pressure for operation and storage.