EasyManua.ls Logo

ZF 305-2A - Troubleshooting; Oil Pressure Problems; Oil Temperature and Level Problems

ZF 305-2A
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
ZF PADOVA
SECTION
7
TROUBLESHOOTING
SYMPTOMS CAUSES RIMEDIES
1) No oil pressure
in the main circuit or
lubrication in
neutral or in gear position
1 - No oil in gearcase
2 - Suction filter completely clogged
3- Pump drive coupling broken
- Fill with oil
* - Remove and clean the filter
* - Remove pump and replace cou-
pling
1 - Oil level toolow
2 - Incorrect position of gear shift
lever
3 - Suction filter partially clogged
4 - Incorrect oil type
5 -Trolling lever in trolling range (if
present)
2) Low oil pressure with
drive engaged
- Insufficient oil level
- Register the control in the distri-
butor
- Replace with prescribed oil
1 - Water flow rate in oil cooler too
low
2 - Oil cooler dirty
3 - Oil level too high or too low.
4 - Incorrect oil type
5 - Clutch slipping
3) High oil temperature
* - Replace valves and pipelines with
others of larger internal diameter
* - Clean oil cooler
- Restore normal level
- Drain gearbox and fill with correct
grade
- Check operating pressure
1 - Inefficent or erratic oil/water heat
exchange
4) Oil level fluctuating
* - Replace oil cooler
* You are advised to contact authorised ZF service centres to rectify the points marked with this
symbol.
Plus d'informations sur : www.dbmoteurs.fr

Related product manuals