Frequently ask question
Suggested Solution
ZDock not detected with quick
unplug and plug upstream cable.
ZDock switches off by itself after 10
seconds.
Certain notebook takes a longer time to close its opened
application when Zdock upstream cable is unplugged. Allow
about 5 seconds interval before plugging in the upstream
cable again.
More information could be found on DisplayLink knowledge Base website
https://support.displaylink.com/knowledgebase
Use only the power adapter that comes with ZDock, or else
it will switch off by itself if a different adapter is used.
FAQs
To Next Page
Loading...
Need help?
General