EasyManua.ls Logo

Zgonc YELLOW PROFILINE YPL 1900 - User Manual

Zgonc YELLOW PROFILINE YPL 1900
36 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
D
Abbruchhammer
Originalbetriebsanleitung
GB
Demolition Hammer
Translation of the original instructions
YPL 1900
Art.Nr.
5906103924
AusgabeNr.
5906103851
Rev.Nr.
16/04/2015
Art.Nr.
3908204972 (57933)
Ausgabe Nr.
3908204850
Rev.Nr.
15/02/2018
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58

Table of Contents

Questions and Answers

  • B
    Brian CrawfordAug 10, 2025
    Why Zgonc YELLOW PROFILINE YPL 1900 Power Hammer motor does not start?
    • K
      Katelyn JacobsAug 10, 2025
      The Zgonc Power Hammer motor might fail to start due to several reasons: * A blown mains fuse: In this case you should check the mains fuse. * A defective extension cable: Replace the defective extension cable. * Disrupted connections at the motor or switch: Consult an electrician to check the connections. * A defective motor or switch: Engage an electrician to inspect these components. * Defective carbon brushes: An electrician should check the carbon brushes.
  • M
    Melissa EvansAug 26, 2025
    What to do if my Zgonc Power Hammer motor doesn't work and the fuse blows?
    • J
      Jason TaylorAug 26, 2025
      If the Zgonc Power Hammer motor isn't working and the fuse keeps blowing, it could be due to: * Insufficient cross-section of the extension cable. Refer to the Electrical Connection section for guidance. * Overload. In this case you should check the tool. * An electrical defect. Consult an electrician to check for electrical issues.

Zgonc YELLOW PROFILINE YPL 1900 Specifications

General IconGeneral
BrandZgonc
ModelYELLOW PROFILINE YPL 1900
CategoryPower Hammer
LanguageEnglish