3
GPS activated GPRS Battery Status
Pedometer Network Signal Time
(3) Install SIM card
1) Before installing the SIM card
A. It is recommended that you wear the watch, go to outdoor open areas, long press "Power" button for around 3
seconds to boot; Wait about 1 minute, the watch with GPS function will automatically use the GPS Time Giving (time
accurate to 0.01 second).
B. Lighten the screen to view time, date, day and weather.
C. Under standby mode, long press "Power" button for 3 seconds, the watch will automatically shut down.
2) Install SIM card
A. In the power off state, insert the micro SIM card in the direction shown in the figure (make sure the SIM card is
enabled with functions of Caller ID display, sending and receiving SMS, and GPRS)
As the picture shows:
Push the SIM card carefully until you hear a click. The card will be fastened in the watch.
To Next Page