Need help?Do you have a question about the Zhejiang IPC2122SR3PF36 and is the answer not in the manual?
Explanation of symbols for general safety, ESD, and electric shock hazards.
Essential safety instructions for installation and operation by qualified personnel.
Guidance on proper installation procedures for the network camera.
Instructions for cleaning the camera lens and sensor, and handling.
Compliance with FCC rules regarding radio frequency interference for digital devices.
Product compliance with European Low Voltage and EMC Directives.
Information on product disposal according to the Waste Electrical & Electronic Equipment Directive.
Details the physical dimensions and overall look of the network bullet camera.
Illustrates how to connect the camera's power and network cables.
Instructions and diagrams for mounting the camera on a wall.
Steps to install the ActiveX control required for accessing the camera via web browser.
General| Model | IPC2122SR3PF36 |
|---|---|
| Category | Security Camera |
| Power Consumption | Max 5.5W |
| Ingress Protection | IP67 |
| IR Range | Up to 30 m (98 ft) |
| Manufacturer | Zhejiang |
| Resolution | 1920 x 1080 |
| Lens | 3.6 mm fixed lens |
| Minimum Illumination | 0 Lux with IR on |
| Day/Night | IR-cut filter with auto switch |
| Wide Dynamic Range | DWDR |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 1 RJ45 10M/100M Ethernet port |
| Power Supply | DC 12V, PoE (802.3af) |
| Operating Temperature | -30°C ~ +60°C (-22°F ~ 140°F) |
To Next Page