Zhengte 496840 - User Manual

1
10 ft x 20 ft / 3 m x 6 m
STEEL FRAME CANOPY
Instruction Manual
ITM./ART.496840
Before assembly, read these instructions carefully.
Assemble the canopy in the location where you intend to use it.
2 or more people are recommended for assembly.
WARNING: Keep all flame and heat sources away from this canopy fabric.
This canopy is made with fabric that meets CPAI-84 specifications for flame resistance.
It is not fire proof. The fabric will burn if left in continuous contact with a flame source.
This canopy is meant for vehicle/boat storage and should not be used for public
gatherings.
Please check with your local regulations prior to purchasing this item. Some
municipalities have restrictions and requirements.
This canopy should not be used during heavy wind, ice or snowing conditions. The
accumulation of snow and ice on canopy roof may pose a safety concern. Under severe
weather conditions, disassemble your canopy and store indoors.
It is strongly recommended that the canopy remain secure to the ground at all times via
the base plates and nylon straps supplied. Avoid placing the unit on soft ground and
ground that is prone to flooding.
MADE IN CHINA
For parts or customer service, please call 1-800-867-9018
Monday-Friday, 8:30am-4:30pm Pacific Standard Time

Summary

General Information and Safety Precautions

Flame Resistance Warning

Keep flame and heat sources away; fabric is not fireproof and will burn if exposed.

Usage and Environmental Guidance

Intended for vehicle/boat storage only. Avoid high winds, snow, ice; disassemble if necessary.

Parts Identification

Component Breakdown

List of all parts with descriptions, illustrations, and quantities for assembly.

Roof Frame and Initial Post Assembly

Roof Frame Construction

Connect incline bars (A) and horizontal bars (B) into corner pieces (D, E).

Initial Post Installation

Insert posts (C, C1) into one side of the roof frame for stability.

Canopy Roof and Post Assembly Continuation

Spreading Canopy Roof

Drape the canopy roof (M) over the assembled roof frame.

Second Stage Post Attachment

Insert remaining posts (C) into the other side of the roof frame.

Base Plate and Panel Attachment

Base Plate Securing

Attach base plates (K) to the bottom of posts (C, C1) using nuts and bolts (L).

Side and End Panel Installation

Attach side panels (N, O) and end panels (P, Q) using elastic ball straps (R).

Final Assembly Steps

Panel Fastening

Secure adjacent panels with hook and loop fasteners and attach panels to posts.

Securing Canopy Corners

Insert elastic ball straps through end panel, roof canopy corner, and side panel grommets.

Anchoring and Awning Assembly

Ground Anchoring Options

Instructions for securing canopy to grass/dirt with stakes or to concrete.

Awning Arm Attachment

Attach awning arms (F) to posts (C1) using bolts (H) and connect fabric fasteners.

Detailed Awning Assembly Steps

Awning Frame and Fabric Integration

Step-by-step guide for attaching awning components (G, F) and fabric.

Zhengte 496840 Specifications

General

Brand	Zhengte
Model	496840
Category	Tent
Language	English