Need help?Do you have a question about the Zhone 6511-A1 and is the answer not in the manual?
Provides essential safety guidelines for installing and operating the router.
Step-by-step instructions for connecting the modem to the phone line and PC.
Guides for setting up TCP/IP addresses for Windows 2000, XP, and 7.
Instructions on how to access the router's web interface by entering its IP address.
Enables automatic detection of PVC and protocols like PPPoE for quick setup.
Guides for manual setup by specifying VPI, VCI, and WAN service protocols.
Configures a PPPoE WAN service using PPP over Ethernet for internet access.
Configures a PPPoA WAN service using PPP over ATM for internet connection.
Configures an IPoE WAN service using IP over Ethernet for internet connection.
Configures an IPoA WAN service using IP over ATM for internet connection.
Configures router IP address and subnet mask for the LAN interface.
Enables Virtual Servers, Port Triggering, and DMZ Host settings.
Blocks or permits traffic based on IP addresses for outgoing and incoming connections.
Restricts device access to the Internet based on days and times.
Enables/disables wireless function, hides access point, sets SSID and country.
Selects network authentication and enables/disables WPS.
Runs diagnostic tests to check the DSL connection status.
Restores router settings to factory defaults, deleting all changes.
Enables or disables router services for LAN or WAN access.
Changes user account passwords for access control.
Limits web access to the router via an Access Control list.
Upgrades router software by uploading an image file from the ISP.
Checks power, LEDs, PC/router settings, and pingability for non-functional router.
Troubleshoots connection problems by checking LEDs, cables, and network configuration.
Explains blinking DSL LED indicates training issues, possibly due to distance.
Checks DSL service and line noise if the DSL LED is off.
Checks modem configuration and WAN status if the Internet LED is off.
Uses IP utilities like Ping to diagnose network connectivity issues.
Provides essential safety guidelines for installing and operating the router.
Step-by-step instructions for connecting the modem to the phone line and PC.
Guides for setting up TCP/IP addresses for Windows 2000, XP, and 7.
Instructions on how to access the router's web interface by entering its IP address.
Enables automatic detection of PVC and protocols like PPPoE for quick setup.
Guides for manual setup by specifying VPI, VCI, and WAN service protocols.
Configures a PPPoE WAN service using PPP over Ethernet for internet access.
Configures a PPPoA WAN service using PPP over ATM for internet connection.
Configures an IPoE WAN service using IP over Ethernet for internet connection.
Configures an IPoA WAN service using IP over ATM for internet connection.
Configures router IP address and subnet mask for the LAN interface.
Enables Virtual Servers, Port Triggering, and DMZ Host settings.
Blocks or permits traffic based on IP addresses for outgoing and incoming connections.
Restricts device access to the Internet based on days and times.
Enables/disables wireless function, hides access point, sets SSID and country.
Selects network authentication and enables/disables WPS.
Runs diagnostic tests to check the DSL connection status.
Restores router settings to factory defaults, deleting all changes.
Enables or disables router services for LAN or WAN access.
Changes user account passwords for access control.
Limits web access to the router via an Access Control list.
Upgrades router software by uploading an image file from the ISP.
Checks power, LEDs, PC/router settings, and pingability for non-functional router.
Troubleshoots connection problems by checking LEDs, cables, and network configuration.
Explains blinking DSL LED indicates training issues, possibly due to distance.
Checks DSL service and line noise if the DSL LED is off.
Checks modem configuration and WAN status if the Internet LED is off.
Uses IP utilities like Ping to diagnose network connectivity issues.
General| Frequency Band | 2.4 GHz |
|---|---|
| Connectivity Technology | Wired, Wireless |
| Device Type | Network Router |
| Ports | 4 x 10/100 Ethernet LAN |
| WAN Ports | 1 x 10/100 Mbps Ethernet |
| Wireless Standard | 802.11b/g |
| Antenna | Internal |
| Power Supply | 12V DC |
To Next Page
