Need help?Do you have a question about the Zhone zNID-GPON-2424 and is the answer not in the manual?
Introduces the zNID 24xx Series as a family of indoor, full-featured gateways for residential installations.
Details the various interfaces, displays, and buttons found on the zNID 24xx series devices.
Lists the specific interfaces supported by GPON and Gigabit Ethernet models within the zNID 24xx series.
Explains the methods (CLI, Web, SNMP, OMCI) for fully managing zNID 24xx products.
Provides instructions on how to log directly into zNIDs via Ethernet ports or Command Line Interface (CLI).
Describes the three user accounts (admin, support, user) controlling device access and their respective privileges.
Explains how to change or create passwords for the user accounts via Access Controls | Password.
Guides users on selecting DNS sources (Static, DHCP, PPPoE, OMCI) and entering DNS information.
Guides users on saving the current configuration to their PC, suggesting meaningful filename conventions.
Explains how to restore the ONU to a previously saved configuration by browsing and selecting the configuration file.
Details the process of returning the zNID to its factory default configuration settings.
Explains how to restore software from an alternate bank or use a saved version, including the reload process.
Guides users on updating the ONU's software using a saved configuration file from their PC.
Covers information about the device, MIB-2 objects, system uptime, model, serial number, and MAC addresses.
Details device counters for bytes and frames transmitted and received on Ethernet and Wireless LAN interfaces.
Shows authenticated wireless stations accessing the wireless access point, including MAC, association, and SSID.
Details voice logs provided by the zNID, including Voice Packet Log and Call Audit log for debugging and activity monitoring.
Covers Zhone zNID interface types: Bridged, Routed, Brouted, PPPoE, Ethernet, GPON, and Rate Limits.
Details the factory default VLAN settings, including the default management VLAN and data VLAN.
Explains how to set MIB-2 SNMP objects for System Name, System Location, and System Contact.
Guides users on adding static routes to the zNID, defining destination IP, interface, gateway, and metric.
Explains access control lists for defining packet/frame allowance based on IP or MAC addresses per interface.
Provides protection against unwanted intrusion by enabling firewall options for management access and port forwarding.
Lists interfaces for management traffic and indicates protocol allowance, requiring global firewall enablement.
Covers configuring port forwarding rules (DMZ, Range, Remap) to allow specific traffic to reach internal devices.
Explains ISO layer two bridging functions that connect network segments based on MAC addresses.
Defines the Internet Protocol (IP) as a network-layer protocol for routing packets based on addressing information.
Describes Brouted VLANs with two IP interfaces for routed uplink and bridged LAN, enabling local peer-to-peer communication.
Explains Point-to-Point Protocol over Ethernet (PPPoE) for creating PPPoE tunnels between hosts and network servers.
General| Device Type | GPON Gateway |
|---|---|
| Wi-Fi | 802.11b/g/n |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Ports | 2x POTS |
| GPON Interface | 1 x GPON port |
| Power Supply | 12V DC, 1.5A |
| Dimensions | 35 mm |
To Next Page
