What to do if my Zibro Dehumidifier fan and compressor are not working?
If the fan and compressor of your Zibro Dehumidifier aren't working, check the power supply to the dehumidifier. Ensure there is current and that the voltage is not too low. Also, check if the plug or cord is damaged. If the voltage is too low, contact your electrical supplier. For other issues, it is recommended to contact a qualified electrician.
Why is my Zibro Dehumidifier not dehumidifying or has low capacity?
If your Zibro Dehumidifier isn't dehumidifying effectively, it might be set to defrost. Another possible cause is a clogged filter, so try cleaning it. If neither of these resolves the issue, gas might be leaking, or the temperature and relative humidity might be too low. In such cases, contact a qualified electrician.
How to fix a noisy Zibro Dehumidifier?
If your Zibro Dehumidifier is making noise, first ensure it is placed on an even surface. If the noise persists, it could be due to a loose motor or compressor assembly, or noise from the water supply. In these cases, it's best to contact a qualified electrician.
What to do if my Zibro Dehumidifier is covered with ice?
If your Zibro Dehumidifier is covered with ice, the filter might be clogged, so try cleaning it. If the issue persists, the defrost setting may not be working. In this case, switch off the device and contact a qualified electrician.
What to do if my Zibro Dehumidifier is covered with ice and water is overflowing?
If your Zibro Dehumidifier is covered with ice and water is overflowing, it could be due to a leaking water tank or a fault on the primary tank’s liquid level coupler. In either case, contact a qualified electrician.
What to do if the fan works, but the compressor does not work on my Zibro Dehumidifier?
If the fan is working but the compressor isn't on your Zibro Dehumidifier, it might be within the safety delay, which lasts three minutes. The compressor should return to normal operation after this delay.
What to do if the compressor is working, but the fan is not working on my Zibro Dehumidifier?
If the compressor is working, but the fan isn't on your Zibro Dehumidifier, it indicates a fan fault. Contact a qualified electrician.
Proper procedures for storing the dehumidifier when not in use.
Guidelines for environmentally responsible disposal of the appliance.
Using the dehumidifier to collect water in its internal tank.
Connecting an external drain for continuous water removal.
Understanding and using the electronic display for settings and status.
Instructions for cleaning the appliance's air filter for optimal performance.
Procedures for handling warranty claims and service.
Conditions and limitations not covered by the product warranty.
General| Power consumption | 320 W |
|---|---|
| Operating temperature | 5-35°C |
| Refrigerant | R134a |
| Dimensions | 343 x 500 x 280 mm |
| Weight | 11.5 kg |
| Operating Temperature Range | 5-35°C |
| Dehumidifying capacity | 10 liters/day |
| Dehumidification Capacity | 10 liters/day |
To Next Page
