Do you have a question about the Zico ZI-846 and is the answer not in the manual?
Brand | Zico |
---|---|
Model | ZI-846 |
Category | Multimeter |
Language | English |
Specifies maximum voltage/current limits for safe operation.
Emphasizes extreme caution when working with high voltages.
Warning against exceeding 500V on the COM input jack.
Advises against connecting leads in wrong modes to prevent damage.
Instructs to discharge capacitors before resistance/diode tests.
Outlines safety steps for replacing fuses or batteries.
Stresses operating the meter only with covers securely fastened.
Symbol indicating to refer to instructions for safety.
Symbol indicating a potentially hazardous situation with risk of death/injury.
Symbol indicating a potentially hazardous situation with risk of product damage.
Symbol advising against connecting marked terminals to circuit points at high voltage.
Symbol identifying terminals associated with hazardous voltages.
Symbol indicating double or reinforced insulation protection.
The digital display screen of the multimeter.
Rotary dial for selecting measurement functions.
Input jack for high current (10A) measurements.
Common input jack for all measurements.
Positive input jack for voltage and resistance measurements.
Button to freeze the displayed measurement.
Button to activate or deactivate the display backlight.
Symbol indicating continuity test mode.
Symbol indicating diode test mode.
Symbols for micro, milli, and kilo used in measurements.
Symbols for Volts DC, Volts AC, and Amps DC.
Symbol indicating battery test function.
Ranges, resolution, and accuracy for DC voltage measurements.
Ranges, resolution, and accuracy for AC voltage measurements.
Ranges, resolution, and accuracy for DC current measurements.
Ranges, resolution, and accuracy for resistance measurements.
Specifications for battery testing function.
Specifications for diode testing function.
Specifications for continuity checking function.
Input impedance, bandwidth, display, operating temp, etc.