Need help?Do you have a question about the ZIEHL-ABEGG ZAdyn4 and is the answer not in the manual?
General| Communication Interfaces | CANopen, Modbus RTU |
|---|---|
| Protection Class | IP20 |
| Overload Capacity | 150% for 60 seconds |
| Input Voltage | 3-phase 380-480 V AC |
| Output Voltage | 0 to Input Voltage |
| Ambient Temperature Range | -10°C to +40°C (derating above 40°C) |
Specifies the applicability of the instruction manual to the ZAdyn4C MRL frequency inverter.
Outlines the manual's structure and its relation to other documentation.
Identifies the intended audience for the operating instructions.
Details the manufacturer's liability limitations regarding product use and modifications.
Describes the intended use of the ZAdyn4C MRL frequency inverter in elevator machines.
Provides general guidelines and precautions for installing the ZAdyn4C MRL frequency inverter.
Details the physical dimensions and required clearances for mounting the device.
Explains how to ensure electromagnetic compatibility during installation.
Identifies the terminal positions and device setup for different ZAdyn4C MRL models.
Illustrates the cable routing and connection points for the ZAdyn4C MRL units.
Describes the method for securing cables using cable ties for strain relief.
Details the requirements for proper protective earth connection of the device.
Provides instructions for connecting the device to the main power supply.
Guides on how to connect the motor to the frequency inverter.
Explains the motor temperature monitoring function and its connection.
Details the brake resistor connection and its importance for the device.
Describes the connection and configuration of digital inputs.
Explains the connection and configuration of digital outputs.
Covers the connection and functionality of the DCP/CAN interface.
Details the interface for safe torque off (STO) function.
Explains how to connect encoders for synchronous motors.
Describes the function and connection of the artificial encoder.
Covers the connection and use of an external 24V power supply.
Provides information on brake monitoring and triggering.
Explains how to monitor external functions like brake contactors.
Offers circuit suggestions for specific ZAdyn4C MRL models.
Details the steps for mechanically installing the optional device switch Q1.
Guides on the electrical connections for the device switch Q1.
Explains how to test the STO safety function during start-up and maintenance.
Presents detailed technical specifications for the ZAdyn4C MRL series.
Provides the EC/EU declaration of conformity for the product.
To Next Page
