ZIEHL TR1200 Quick Guide

ZIEHL industrie – elektronik GmbH + Co KG
Daimlerstr.13, 74523 Schwäbisch Hall, Germany
+ 49 791 504-0, info@ziehl.de, www.ziehl.de
Temperature Relays and MINIKA® Mains Monitoring Digital Panelmeters MINIPAN® Switching Relays and Controls Measuring Transducers Grid- and Plant Protection
Quick Guide TR1200
updated: 2017-11-09/Fu
from Firmware: -03
TR1200 12320-0752-04 Page
1
/ 8 www.ziehl.de
- Pt 100 thermostat with 12 sensor ports and Interface RS485
Detailed operating manual see: http://www.ziehl.com/en/Products/detail/TR1200-39
1 Display and controls
1
LED relay state (yellow)
OFF
The relay is released
Illuminated
The relay is picked up
2
LED sensors (yellow)
Illuminated
Displays the sensor value belonging to the LED in the digital
display
flashes, 8Er18or8Er28
Sensor error in the corresponding sensor circuit
All illuminated
Displays the value of the warmest sensor in the digital display
3
Digital display 3 digits (red)
Display of sensor value
Display of error codes e.g. 8Er98
4
Hindmost decimal point (red)
OFF
Display mode
Illuminated
Menu mode
flashes
Parameter mode
5
LED error (red)
OFF
normal operation
Illuminated with 8Er18 , 8Er28 ,
8Er88 or 8Er98
Sensor error, malfunction, invalid parameter
6
Button Up / Down (display mode, normal operation)
Press briefly
Change into the menu mode (see Operating instructions Point 8.4)
Press for > 2s
Displays the stored MAX value (Up) / MIN value(Down) – press also
button Set for ≥ 2s to erase the stored value
7
Button Set / Reset (display mode, normal operation)
Press briefly
Displays the value of next sensor (sensor LED illuminates)
Press for > 2s
Reset, back to display mode
Press for > 10s
Displays the software version (e.g. 000)
8
LED RS485 Interface (yellow)
Rx flashes briefly
Unit is receiving data via the RS485 interface
Tx flashes briefly
Unit is transmitting data via the RS485 interface

ZIEHL TR1200 Specifications

General

Brand	ZIEHL
Model	TR1200
Category	Thermostat
Language	English