BASKING Platform FIlter
WATER PUMP ASSEMBLY INSTRUCTIONS
MAINTENANCE TIPS
1. Change filter cartridge monthly.
2. To clean basking platform filter, rinse with warm water and wipe
with damp cloth.
3. If intake holes become clogged with debris, they must be cleaned.
To clean, gently brush away debris with damp cloth, filter brush
or cotton swab.
1. Locate the water pump;
it will be packaged
separately.
3. Locate the larger outlet
tube in this pouch.
4. Insert larger outlet tube
into water pump.
2. Remove small outlet
adapter tube from water
pump.
5. Locate vinyl tube and
connect to outlet tube;
it should fit snugly.
6. Locate elbow connectors.
Insert smaller end of elbow
connector to vinyl tube.
7. Water pump assembly complete.
Intake Holes
To Next Page
Loading...
General