Need help?Do you have a question about the Zimmer Elektromedizin SonoStim and is the answer not in the manual?
Procedure for returning the device for service.
Guidelines for board repairs by authorized personnel.
Reporting of special incidents like electric shocks.
Details about the ultrasonic heads used with the device.
Importance of coupling for sound transmission and output control.
Overview of safety mechanisms and self-checks performed.
Description of the mains connection and power supply.
Explanation of the patient side circuitry and safety features.
Details on device internal temperature monitoring and cooling.
Visual representation of the device's internal components and connections.
General troubleshooting tips for device operation.
Troubleshooting "Over Intensity" error message and its remedies.
Addresses "Over Temperature" error and potential causes.
Troubleshooting "Attach Transducer" message.
Explains "Technical Error" and potential device defects.
Resolving "No Coupling" errors and ensuring proper contact.
Procedure for testing ultrasonic heads for proper function.
Listing and explanation of various error codes.
Form for detailing malfunctions for service purposes.
List of original accessories compatible with the device.
Instructions on how to access the device's test menu.
Explanation of the fixed 99-minute therapy time function.
Requirements and procedure for hardware calibration.
How error messages are displayed and initial checks.
Advice on transient errors and error status reset.
Overview of device modules and handling spare parts.
Guidelines for handling spare parts like EPROMs and boards.
List of necessary measuring equipment for module work.
Step-by-step guide to opening the device housing.
Pin assignments for CPU connectors ST3, ST4, ST5, ST6.
Pin assignments for Main board connector ST2.
Table detailing module connectors and cable types.
List of spare parts with order numbers and descriptions.
Checklist for verifying device functionality and safety.
Details replacement of capacitor C56 on the main board.
Replacement of ceramic capacitors with pulse constant ones.
Replacing resistor R83 with a sub-board for thermal load.
LC-combination for filtering in the patient circuit.
Replacement of capacitors C15 and C16.
Higher value fuses Si3/4 on the main board.
Details about the software versions and their release history.
List of hardware versions and their release dates.
General| Category | Medical Equipment |
|---|---|
| Display | LCD |
| Type | Ultrasound and Electrotherapy Combination Device |
| Ultrasound Frequency | 1 MHz / 3 MHz |
| Presets | Yes, pre-programmed therapy protocols |
| User Protocols | Yes, programmable user protocols |
| Power Supply | Mains |
| Pulse Width | 50 – 400 μs |
| Therapy Modes | Continuous |
| Channels | 2 |
To Next Page