EasyManuals Logo

Zinwell PWQ-5101C Quick Installation Guide

Zinwell PWQ-5101C
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
QUICK INSTALLATION GUIDE
Powerline
Wireless Network
WPS Button
Group Button
LAN Port
Power Button
ON: Ethernet link detected
Reset Button
LEDs LIGHT INDICATOR DEFINITION
Group Button
Reset Button
LAN Port
Press 1~3 secs to
reset to factory default
Power LED
Ethernet Link/
Act LED
PLC LED
Power LED
PLC LED
WLAN Link/Act LED
Ethernet Link/Act LED
ON: Linked w/ other PLC device
Green: Wi-Fi is encrypted
Red: Wi-Fi is not encrypted
Press to join an
encrypted Wi-Fi network.
Clone AP Button
Press to duplicate current Wi-Fi network.
Press 1~3 secs to join an
encrypted PLC network.
Press over 10 secs to create
the encrypted PLC network.
Press 1~2 secs to
reset to factory default
BEFORE GETTING STARTED
Do Not plug PLC adapter into “surge protector”.
PLC data transmission might be blocked.
Modem / Router
Make sure that router is connected to the Internet.
Internet
500 Mbps
Powerline Bridge
500 Mbps Powerline
Wireless N Extender
/Default
To switch between WPS and Clone AP,
please login to Advanced Wi-Fi Setting
via web browser.
For Instruction Manual go to
http://www.zinwell.com.tw/manual/PWQ-5101C_UM.zip
IB04722799-0

Other manuals for Zinwell PWQ-5101C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zinwell PWQ-5101C and is the answer not in the manual?

Zinwell PWQ-5101C Specifications

General IconGeneral
BrandZinwell
ModelPWQ-5101C
CategoryExtender
LanguageEnglish