Zip'r Breeze 3 User Manual

33
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to three different
heights. (Figure 12).
1. Remove the seat from your scooter. See
“Disassembly & Assembly” section of this
manual.
2. Use the attached ring to pull and remove the
detent pin from the lower seat post.
3. Raise or lower the upper seat post to the
desired seat height.
4. While holding the upper seat post at the
height, match up the adjustment holes in the
upper and lower seat post.
5. Fully insert the detent pin.
6. Replace the seat.
Upper Seat Post
Adjustment Holes
Detent Pin
Lower Seat Post
FIGURE 12. SEAT
HEIGHT ADJUSMENT
COMFORT ADJUSTMENTS CONTINUED

Zip'r Breeze 3 Specifications

General

Brand	Zip'r
Model	Breeze 3
Category	Scooter
Language	English