Need help?Do you have a question about the Zip HydroTap G5 H57783Z07AU and is the answer not in the manual?
General| Model | H57783Z07AU |
|---|---|
| Type | HydroTap |
| Generation | G5 |
| Category | Kitchen & Bath Fixtures |
| Filtered Water | Yes |
| Operating Pressure Min | 150 kPa |
| Weight | 20 kg |
| Material | Stainless Steel |
| Finish | Brushed Chrome |
| Functionality | Boiling, Chilled |
| Power Supply | 220-240V AC 50 Hz |
| Warranty | 5 years |
| Installation | Under-sink |
Explains symbols used in the manual for warnings and instructions.
Instructions and precautions before operating the HydroTap.
How to use the Classic Plus and Elite Plus HydroTap models.
How to use the Touch-Free Wave HydroTap model.
How to use Arc, Cube, and Celsius HydroTap models.
How to use Celsius Plus AIO and Pull-Out HydroTap models.
How to use the Classic HydroTap model.
How to operate HydroTap Mixer taps for hot and cold water.
Guide to navigating the HydroTap Command Centre touch screen interface.
Using the Home screen to monitor HydroTap status and indicators.
Accessing the main menu for HydroTap configuration.
Configuring general HydroTap settings like language and date/time.
Accessing and configuring various system settings for the HydroTap.
Managing filter settings, including flush and reset procedures.
Adjusting boiling and chilled water temperature set points.
Configuring CO₂ settings, including purge, reset, and life tracking.
Setting the dispense times for different water types.
Calibrating the light sensor for energy-saving modes.
Adjusting fan speed for quiet operation and performance.
Configuring advanced settings related to cavitation modes.
Advanced settings specific to Wave Tap models.
How to restart the HydroTap system to reset faults or passwords.
Configuring safety and security settings for the HydroTap.
Enabling/disabling boiling safety features and hot isolation.
Setting up a passcode to protect system settings.
Managing energy-saving features like sleep mode and timers.
Configuring when and how the HydroTap enters sleep mode.
Setting timers for automatic on/off operation.
Monitoring the HydroTap's energy consumption.
Accessing system information, logs, and fault history.
Step-by-step guide for replacing the internal water filter.
Procedures for cleaning and maintaining the air inlet filter.
General cleaning guidelines for the HydroTap unit.
Understanding CO₂ cylinders and regulators.
Detailed steps for changing the 2.64kg CO₂ cylinder.
Detailed steps for changing the 1.2kg CO₂ cylinder.
To Next Page
