Zip IP-CAM360 - Network

To Next Page

To Previous Page

5.3.3 Network

Click on Network Parameters in Network to open the following page:

5.3.3.1 Network

Type: DHCP (Automatically Acquired), PPPOE, Static (Manually Configured – Default)

Client Port: Media (management) port Default = 8240

HTTP Port: Web port Default = 80

IP Address: IP address (Default = 192.168.10.1)

Subnet Mask: Subnet Mask (Default = 255.255.255.0)

Gateway: Default gateway of the device ( Default = 192.168.10.254)

DNS 1: Preferred DNS Server (Default = 192.168.10.254)

DNS 2: Alternate DNS server (Default = 8.8.8.8)

UPNP Untick to disable UPNP function for the IP camera (Default = Enabled)

Note: To enable UPNP, the client/mobile phone port should be set to a value

between 1024-65535.

P2P Switch Untick to disable P2P function for the IP camera (Default = Enabled)

Port Range 1024 – 65535 (Client Port)

