Zip IP-CAM360 - Technical Specifications Summary

47
6. Technical Specifications for IP-CAM360
Model
IP-CAM360
Protocol Version
ONVIF 2.6
Image Sensor
1/1.7” CMOS
Motion Detection
Yes
Resolution
4K (8Mpx)
Privacy Masking
4 Zones
Min. Ilumination
0 Lux IRs on
Camera OSD Menu
Yes
Input Voltage
PoE or 12vDC
Audio Microphone
Built–in microphone
Power Consumption
<7w 600mA
Audio Talkback
Built-in speaker
Power Connection
2.1 Jack plug
Image Adjustment
Yes
P.O.E
Yes
Time Synchronisation
Yes/NTP/DST
Lens
2.0mm 360°
Alarm Input/Output
1 in (1,2) / 1 out (3,4)
No. of IR Leds
3
Memory Card
Yes
IR Range
5 metres
Separate Video Out
Yes
Camera Use
Indoor only
Encoding
H264 / H265
Case Colour
Cream & Black
P2P
Yes
Construction
Metal &
Polycarbonate
Email facility
Yes
Size
120(D) x 56(H) mm
Auto Reboot
Scheduled facility
SPECIAL NOTE:
The default factory IP address for the IP camera is 192.168.10.1
The default factory administrator username and password for this IP camera is
Username: admin Password: 777777
The default Web port number is: 80
The default media (management) port number is: 8240
The default RTSP port number is: 1240
All specifications are approximate. Kovert.com reserves the right to
change any product specification or features without notice. Whilst
every effort is made to ensure that these instructions are complete
and accurate, kovert.com cannot be held responsible in any way for
any losses, no matter how they arise, from errors or omissions in
these instructions, or the performance or non-performance of the
camera or other equipment that these instructions refer to.